Description
PoE to USB-C Fast charge PoE Converter 5V 9V 12V 15V 20V For Tablets IPADS Conference Power+Data in one cable
This device provides a powerful solution for delivering power and wired Ethernet data to a USB-C
device over328ft of network cable.This splitter allows power to be carried on CAT-5e or CAT-6
network cables using either802.3at standard or 56 volt passive PoE. 802.3af switches can also be used – but only 12 watts can be deliveredwithout overload. 10/100/1000 or 10/100 switches can be used – the device will negotiate at 10/100 full duplex rates.
Intended for use with any 802.3at PoE switch – this active PoE solution negotiates with the switch to activate power and provide it tothe client device. It is a compact and cost effective power solution.
The PoE switch supplies 48 or 56 volts DC at the source location.
The higher DC voltage means the current is reduced by a factor of 9 compared to 5 volts, and then carried with 90 less loss overthe Ethernet cable from the source, the 5v converter at the remote end allows you to extend the charge distance for this applicationup to 328ft or 100 meters.
Specification
Connector Types: USB-C Female 1x RJ45 Input Female 1x RJ45
OutputFemale
Data Rate: 10/100MBPS RJ45 Only
Dimensions: 4.5x2x1 Inches
Input Voltage Range: 44-56 Volts IEEE 802.3at Compliant
LEDs Per Port: Green POE / Yellow USB-C
Max Power: 25 Watts
Operating Temperature: -10 to 60C
Operating Humidity: 5 to 90
Output Voltage: 5v,3A; 9v,2.4A; 12v,2A; 15V,1.5A; 20V,1.25A
POE Method: IEEE 802.3at / PoE+ / Passive 30 watt
POE Mode/Pinout: Mode A 1,2 3,6 / Mode B 4,5 7,8
Picture Show