Description
User Manual Lii-PD4
Cautions:
1.Thischarger can chargeallcylindricalrechargeablebatteries 3.7VLi-Ion,3.8VIMR,1.2VNi-MH/Cd, 3.2VLiFePO4
2.Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit
3.If DC input, only12V1Ais recommended
4.Mind heating while charging
5.Remove the charger from power source after charging complete, and remove the battery from the charger at the same time
6.For indoor use only
7.The displaying dataonly for reference, please refer to professional instrument for more accurate data
Specifications and functions:
1.Multi-powerinput: AC cable 110-240V 50/60Hz included/ 12V 1A adapterselective, four independent charging and micro computer management system.
2.Charge current intelligent auto-set of total three levels:500mA /1000mA/2000mA,2000mA is fixed only for slot#4.
3.Multi-functionalLCDchargingdisplay: forcharging progress25 – 50 – 75 -100,battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80VIMR, charging capacity, voltageandcurrent: 0.5A/1A/2A.
4.Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteriesIMR
5.Refresh for OV battery. Itwill not charge any battery of1.65 -2.20V refresh current can be detected only
6.Multi-safety protection function of over-charge and over-discharge,short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.
7.Chargingat constant voltage and current
Button and LCD :
1.Buttonof ModeChannel button:there are 4 independent buttons separately for each channel.Whilepower supplyis connectedand battery inserted, 1Short clickthechannelbuttonin 5Sto change the battery type. It will start to charge 5 seconds after setting the battery type 3.2V or 3.80V, 1.2V Ni-MH and 3.7V li-ion canbe detected automatically, so it needs setting only 3.2V and 3.8V batteries;
Note: Battery type can be only selective before charging starts.
2.LCD: Whilepower supply connected,the LCDwilllight upfor 3S:1 If no battery isinserted,the LCD will displaynulland will be off in 30S2 When battery isinserted anddetected,the LCD will show channel number while the battery type imageLi-Ion 3.7Vflashingindicatingto set the battery type: this momentifshort click the channel button, it can set battery type; ifno operationin5 seconds, it beginsbyautomaticdetectionLi-Ion 3.7V or NIMHthencharging percentage image will flash meaning the start of charging. At the same time the LCD displays also charge voltage, capacity, time and current. When charge completes, it will display100mean while it showsEnd on the LCD right down corner.
LCD displaygraphic reference:
Lii-PD4 Electrical Parameters:
1. Input : AC cable 110-240V 50/60Hz included/ DC 12V 1Aselective
2. Output voltage: DC 4.2V for Li-Ion 3.7V
DC 4.35V for Li-Ion 3.8V IMR
DC 3.65V for LiFePO4
DC 1.48V for NiMH/NI-Cd
3. Output current: Li-Ion/IMR/LiFePO4 2000mA x 1only for slot#4,1000mA x 2, 500mA x 3 500mA x 4
NiMH/NiCd: 1000mA x 2, 500mA x 3 500mA x 4
4. Constant voltage, cut-off current: less than 100mA
5. Standby current: less than 15mA
Compatible battery types and sizes
Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340RCR123, 14500, 10440
NiMH/Cd: AA, AAA,SC, C
Size and weight:
147mm x 100mm x 37mm L x W x H
Weight: approx221g not including AC cable
Lii-500 Charger Specifications:
• DC12V/2A input power.
• 4bay independent ports
• Test the battery capacity
• LCD displays show different modes
• 3 modes of worke
• 4 charging current 300,500, 700, 1000 mAh
• Supports different battery sizes
• Automatic identification of battery type Li-ion, Ni-Mh
• Overcharge protection. Positive and negative reverse connection protection. Over-temperature protection. NiMH battery negative voltage detection -dtv.
• battery fault detection
• 5V 1000mAh USB output discharge
• For NiMH / CD AAA / Micro, AA / mignon, c.
Li-Ion 26650, 22650, 18650.18490, 18500,17500, 17355, 16340 RCR123, 14,500, 10440
Lii-PD2 Charger Features:
1. Adopt DC12V1A nominal input, two-slot independent charging and microcomputer management system;
2. The biggest highlight of this charger is that it can charge the battery regardless of polarity!
3. There are three levels of charging current: 0.5A/1.0A/2.0A, the default charging is 0.5A, you can long press the corresponding button to select the charging current;
4. When charging, the LCD can display channel CH and the charging current, voltage, time, capacity and battery type of this channel Li-Fe 3.20V /
Li-ion 3.70V /Li-ion 3.85V IMR; the total charging current of the two slots does not exceed 2A, that is, when one of the slots is charged with 2A current, and then the battery is charged in the other slot, the front 2A current will drop back Charge up to 1A current; when the battery is fully charged, the LCD will display FULL;
5. It can automatically identify lithium battery Li-Ion 3.70V battery and nickel-metal hydride Ni-MH battery, and manually select lithium iron phosphate battery 3.20V and Li-Ion 3.85V battery;
6. With 0V voltage activation function, 1.65-2.20V cannot be charged but there will be activation current trickle charging.
7. There are multiple safety protection functions such as overcharge, overdischarge, short circuit, etc. At the same time, it can intelligently and automatically identify bad batteries;
8. Charging mode: constant current and constant voltage.
Electrical technical parameters:
1. Input power: DC 12V 1A
2. Output voltage: DC 4.20V for Li-Ion
DC 4.35V for IMR
DC 3.65V for LiFePO4
DC 1.48V for NiMH/NI-Cd
3. Output current optional: Li-Ion/IMR/LiFePO4: 2000mA x 1 only one/1000mA x 2/500mA x 2
NiMH/NiCd: 500mA
4. Constant current/constant voltage charging, cut-off current: <100mA;
5. No-load standby current: <15mA;
LiitoKala Lii-S1 Specifications
Input: Micro USB DC 5V / 1A min.
Output voltage: DC 4.2V 500mA / 1000mA for Li-Ion
DC 4.35V 500mA / 1000mA for IMR
DC 3.65V 500mA / 1000mA for LeFePO4
DC 1.48V 500mA / 1000mA for NiMH / NI-Cd
Constant voltage charging with cut-off current less then 100mA
Standby current: No more than 15mA
Compatible for Batteries:
Li-ion / IMR / LiFePO4: 26650, 21700,20700, 18650, 18490, 17700, 17500, 16340 RCR123, 14500, 10440
Ni-MH / Cd: AA, AAA, A, SC, C size
Size mm / Weight grams:
Length 112mm x Width 37mm x Height 32mm
45 grams charger + 17grams USB cable included in delivery
Features:
1, One-slot charging and management system, Micro USB DC 5V input port
2, Battery polarity auto-detection Any Polarity
3, 500mAh / 1000mAh charging current for selection
4, Built-in digital tube indicator shows the real-time charging status of voltage and current
5, Identify Li-ion and Ni-MH battery automatically
Select manually by short-press the mode button for IMR battery 3.85V Li-ion and LiFePO4 battery 3.2V
6, Activation function for 0V battery of PCM protection.
7, Can not charge battery with 0.0 ≦ U <0.2V for NiMH / Cd and 1.6 ≦ U <2.2V for Li-Ion
8, Over-charging and over-discharge protection
9, Identify broken / defective battery
10, Charging under constant voltage and current
Operation instruction:
There's a 'MODE' button for choosing the battery types and charging current
Long press the 'MODE' button for 3 seconds to change the charging current, you can change the charging current at any time
Short press the 'MODE' button to change the charging types of lithium batteries. If no setting, it will default as 1.2V Ni-MH or 3.7V li-ion battery automatically. You need to change the mode for 3.85V li-ion and 3.2V LiFePO4 battery
It begins to charge the battery 5 seconds after your settings
When the battery is inserted or defective battery is inserted, the charger will have no any response showing null ; When the battery is fully charged, it shows Full
It can display the battery voltage and charge current by short press the 'MODE' button at any time during charging
LiitoKala Lii-S1
Lii-S2 Electrical Parameters:
1.Input : AC cable 110-240V 50/60Hz included/ DC 12V 1Aselective;
2.Output voltage: DC 4.2V for Li-Ion 3.70V
DC 4.35V for Li-Ion 3.85V IMR
DC 3.65V for LiFePO4
DC 1.48V for NiMH/NI-Cd
3.Output current: Li-Ion/IMR/LiFePO4 2000mA x 1only for slot#4,
1000mA x 2/500mA x 2
NiMH/NiCd: 500mA
4.Constant voltage, cut-off current: less than 100mA;
5.Standby current: less than 15mA.
Compatible battery types and sizes
Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340RCR123, 14500, 10440
NiMH/Cd: AA, AAA,SC, C
Size and weight:
133mm x 100mm x 35mm L x W x H
Weight: approx175g
Cautions:
This charger can charge all cylindrical rechargeable batteries 3.7V Li-Ion , 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4
Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit
If DC input, only 12V 1A is recommended
Mind heating while charging
Remove the charger from power source after charging complete, and remove the battery from the charger at the same time
For indoor use only
The displaying data only for reference, please refer to professional instrument for more accurate data
Specifications and functions:
1. Multi-power input: AC cable 110-240V 50/60Hz included/ 12V 1A adapterselective, four independent charging and micro computer management system.
2. Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA,2000mA is fixed only for slot#4.
3. Multi-functional LED charging indicators: for charging progress: 25 – 50 – 75 -100 , battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V IMR and for charging current: 0.5A/1A/2A
4. Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteriesIMR
5. Refresh for OV battery. It will not charge any battery of1.65 -2.20V refresh current can be detected only
6. Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.
7. Charging at constant voltage and current
Button and LED :
1. Button of Mode: While power supply is connected, 1 Short click the mode button to change the battery type. It will start to charge 5 seconds after setting the battery type 3.2V or 3.80V, 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries; 2 During charging process, short click the mode button to display battery type.
Note: Battery type can be only selective before charging starts.
2. LED: While power supply connected, all LEDS light up immediately 1 If no battery is inserted, the 500mAh LED one of the three current display LEDS will keep on and others will be off. 2 When battery is inserted and detected, 4 LED charging indicator for the channel will be on among which 3.7V battery type LED keeps flashing indicating to set the battery type, if no operation in 5 seconds, it begins by automatic detectionLi-Ion 3.7V or NIMH then four LED indicators will display the charging status. 3 During charging, short click the Mode button to show the battery type within 5 seconds; 4 If no power supply is connected, inserting a battery, it can quick shows the remaining charger volume of the battery.
x LED display graphic reference: